Magnetrol - Vibrating Level Switches
|
Vibrating Level Switches
|
D E S C R I P T I O N
Solitel Vibrating Rod Level Switches provide reliable
level detection of powders and bulk solids. This compact,
integral switch is suitable for high or low level
detection in hoppers or silos. It may also be used for
plugged chute detection.
The single-piece probe and the unique self-clean cycle
avoid problems of buildup. Sensitivity of the instrument
can be adjusted to detect a variety of solid materials
ranging from heavy granular materials to light
powders with bulk densities less than one pound per
cubic foot.
|
T E C H N O L O G Y
The Solitel rod vibrates at a frequency of 350 Hz. When
in contact with the media, the vibration is dampened.
The attenuation of the vibration is detected by the integral
mount electronics which change the state of the
relay. The unique self-clean feature is activated when
the vibration is dampened. The self-clean circuitry
increases the amplitude of the vibration to dislodge
any build-up which may have occurred. |
F E A T U R E S
• Single rod design eliminates clogging
• High temperature version up to 320° F (160° C)
• Self-clean cycle and polished probe minimize
solids build-up
• Class I, Div. 2 and Class II, Div. 1 approval
• Adjustable sensitivity adjustment allows easy calibration
for various bulk densities
• Extended rigid probes up to 100 inches (2540 mm)
• Extended flexible lengths to 65 feet (20 meters) |
|
|
